![]() I only used Telnet to test internet access, i.e ping by IP (routing check) and host name (DNS check). If you changed the username during its first startup, it was only changed for web access, linux/DD-WRT login is always root. On Windows 7 Network Map, PCs from Router 2 network appear connected through a Bridge, as opposed to Switch for devices on Router 1 network.Ī quick tip for those new to Linux and struggling to access their DD-WRT router over Telnet. Does not ask for a password, will use the configuration on Wireless pages. Status -> Wireless -> Site survey to Join a network. I am only using 1 physical wireless interface on both routers for this setup, no virtual ones. Preamble = Short (read in some article on the net, not sure if it’s needed or not). Router (Router 2), LAN & WAN (LAN would probably work too, since WAN is disabled).Īdvanced Wireless Settings. Setup - Advanced Routing, operating mode: WAN Connection Type = Automatic configuration - DHCP. Both internet and local network are now working. Select the Wireless -> Basic Settings Configure the settings for the 2.4. ![]() TP-Link TL-WR1043ND, same version, regular firwmare (8MB), later Router 2.ĭespite routers run on Broadcom and Atheros chips, it was possible to configure them to cooperate. Select the Setup -> Advanced Routing tab 3. ![]() Scroll down to Network Address Server Settings (DHCP). You probably won’t, but our lawyers require us to say that. Asus RT-N12, DD-WRT v24-sp2 build 14896 (08/07/10), mini image (4MB firmware size), connected to the internet, later being referred to as Router 1. Open a browser on your PC and connect to the DD-WRT router its default address is The default login is root and password is admin. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |